| Section#102 |
Part # |
Glendinning
Description |
|
|
04053 |
GMP
CABLEMASTER HAWSE PIPE CLAMP ASSEMBLY
(Double) |
|
|
Mounts the Power Unit to the Hawse Pipe, used in various other applications.
|
| One comes standard with each
Cablemaster. (Anodized Cast Aluminum, SS U-Bolts ) |
|
|
|
| Section#103 |
Part # |
Glendinning
Description |
|
|
04052 |
GMP
CABLEMASTER PIPE CLAMP ASSEMBLY (Single) |
|
|
Used in various applications to attach brackets to or
clamp on 3" schd 40 PVC pipe.
|
| Used in the Horizontal and Vertical Pipe Extension Kits |
| Used in the Pipe to Pipe Angling Assembly.
(Anodized Cast Aluminum, SS U-Bolt)
|
|
|
|
| Section#104 |
Part # |
Glendinning
Description |
| N/A
|
50005 |
GMP CABLEMASTER
CONNECTOR LINK |
|
Mounts the Power Unit to the Hawse Pipe Assembly.
|
| Used to connect two Pipe Clamp Assemblies together
& various
other applications. |
| One comes standard with each
Cablemaster. (Anodized Extruded Aluminum)
|
|
|
|
| Section#105 |
Part # |
Glendinning
Description |
|
|
50006 |
GMP
CABLEMASTER OVERHEAD MOUNTING BRACKET |
|
|
Used to mount the Power Unit to the overhead when remote mounting
the Power Unit.
|
| Material: Anodized Extruded Aluminum |
|
|
|
| Section#106 |
Part # |
Glendenning
Description |
|
|
04040 |
GMP
CABLEMASTER PIPE END ROLLER ASSEMBLY |
|
|
This keeps the cable from chafing on the end of the PVC pipe and
is highly recommended.
|
| It is glued into the end of 3" schd 40 PVC pipe.
( PVC Tubing, Nylon Rollers, SS Pins ) |
|
|
|
| Section#107 |
Part # |
Glendenning
Description |
|
|
04061 |
GMP
CABLEMASTER STRAIGHT PIPE ROLLER ASSEMBLY |
|
|
Used on long pipe runs over 6' to break friction between cable and
PVC pipe
Fits 3" schd 40 PVC pipe.
|
| Recommended to be placed every 3' on long pipe runs.
( PVC Tubing, Nylon Rollers, SS Pins ) |
|
|
|
| Section#108 |
Part # |
Glendenning
Description |
|
|
50426 |
GMP
CABLEMASTER IN-LIMIT SW PLATE |
|
|
|
|
Used to connect the Out-Limit Switch Assembly to the Connector
Link (#50005) when an alternate In-Limit Switch Assembly is
required.
|
| Material: Anodized Extruded Aluminum |
|
|
|
| Section#109 |
Part # |
Glendenning
Description |
|
|
50004 |
GMP
CABLEMASTER PIPE EXTENSION PLATE |
|
|
Used with the Vertical Pipe Extension to attach Pipe Clamp
Assembly to the Power Unit.
|
| Used with the angling Assemblies to guide the cable around bends.
(Anodized Cast Aluminum) |
|
|
|
| Section#110 |
Part # |
Glendenning
Description |
|
|
50419 |
GMP
CABLEMASTER GUIDE ROLLER OFFSET PLATE |
|
|
Used to attach the Out-Limit Switch Assembly to the Power Unit
|
| One comes with each Cablemaster
(Anodized Cast Aluminum) |
|
|
|
|
More
Accessories NEXT
PAGE------------------>
|
|
|
|
|
|
|
|
Revised:03/26/2006 04:30:40
|
